User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
eld, and then press “update” button to continue.
• TFTP:
• Use Windows Command Prompt window to run the tftp
client program.
• Syntax: tftp -i 10.1.1.1 put FILE_DIRECTORY\FILENAME.bin
• The rmware update should take about 45 seconds to
complete.
• If the update process somehow goes wrong (like power
failure), please connect to http://10.1.1.1 to try and restart
the process (you may have to reset the device rst).
Conguring TCP Mode
Note: When TCP mode is set to Server or Client mode, the
UDP mode will be disabled automatically. When UDP mode
is enabled, the TCP mode will be disabled automatically.
1. From the Home screen, click the TCP Mode link on the left-
hand side of the screen.
2. The TCP Mode screen will appear.