User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
System IP Screen
4. On the System IP screen, you can adjust the network
conguration settings by selecting the Static radio button on
the IP Congure eld,
5. If the IP Congure eld is set to DHCP mode, all other
settings will be ignored, and the IP address will be assigned
by DHCP server after resetting the device.
6. Press the Update button to apply the network changes and
reset the default for the changes to take place.