User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Authentication Screen
4. Enter a new login ID and Password (The ID and Password
must be a maximum of 15 characters and alphanumeric).
5. Press Update button to store the data.
6. Reset the device to for the new ID and Password to take
eect.
Conguring System Network Settings
1. From the Home screen, click the Administrator link on the
left-hand side of the screen.
2. From the drop down menu select the System IP link.
3. The System IP screen will appear.