Port RS232 Serial over IP Ethernet Device Server NETRS2321P *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Overview...................................................................................1 DIN Rail Mounting..................................................................................................................................... 2 Load Default Settings / System Reset Button.................................................................................. 2 LED Indicators..................................................................................................
Product Overview Top View DIN rail screw hole Wall-mount screw hole Front View RS-232 DB9 male serial port Rear View RJ45 10/100M Ethernet port DC Jack Load Default/Reset Button Instruction Manual 1
DIN Rail Mounting Attach the included DIN Rail brackets (one per side) using the provided screws to the top DIN Rail screw hole (marked in the above diagram), and clip to your DIN Rail Load Default Settings / System Reset Button Load Default Settings Press and hold this button for more than 3 seconds, then release to load the factory default settings. IP address: 10.1.1.1 Subnet Mask: 255.0.0.
RJ45 Ethernet Pin Assignments Pin 1 TX+ 2 TX- 3 RX+ 6 RX- RS-232 DB9 Male Pin Assignment NOTE: This serial device server performs as a DTE device.
Introduction Packaging Contents • 1 x Serial over IP Device Server • 1 x Universal Power Adapter (NA/UK/EU/AU) • 1 x Software CD • 1 x Instruction Manual • 1 x DIN Rail Kit Installation Web Browser Method 1. Plug in the power adapter and connect the RJ45 interface to your LAN. NOTE: Alternatively, you can also use a crossover cable to connect the NETRS2321P directly to your system for the initial configuration. 2.
Broadcast Search The Broadcast Search function is used to locate all NETRS2321P devices that are connected to the same LAN as your computer. Since the Broadcast Search function searches by MAC address and not IP address, all NETRS2321P connected to the LAN will be located, regardless of whether or not they are part of the same subnet as the host. NOTE: Broadcast packet packets are not passed through a router. The VCom utility can only be used to monitor devices in the same segment of the LAN.
Server/Client (TCP Mode only) Set the device to be a Telnet Server. In server mode, the Telnet port listens and waits for a host or other client to make a connection. In this case the Ethernet connected device is the client. Set the device to be a Telnet Client. In the case the Ethernet connected device is the Telnet server or other NETRS2321P in server mode.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
