User Manual

Warranty 2 Years
Hardware Audio Yes
Chipset ID STDP4320
Converter Type MST Hub
Output Signal DisplayPort
Ports 3
Performance Maximum Digital Resolutions Up to 4K
Supported Resolutions
Note: MST shares 21.6 Gbps across all attached displays.
Higher resolutions can restrict the available bandwidth with
the remaining ports, please see our guideline below for
determining an ideal resolution for your setup.
Average resolution bandwidth allocation
1920x1080 (High-definition 1080p) @60hz - 22%
1920x1200 @60hz - 30%
2560x1440 @60hz - 35%
2560x1600 @60hz - 38%
3840 x 2160 (Ultra HD 4K) @30hz - 38%
Note: Exceeding 100% will reduce functionality.
Wide Screen Supported Yes
Connector(s) Connector A 1 - Mini-DisplayPort (20 pin) Male
Connector B 3 - DisplayPort (20 pin) Latching Female
Software OS Compatibility Windows 10 (32/64)
Windows 8/8.1 (32/64)
Windows 7(32/64)
Special Notes /
Requirements
Note DisplayPort 1.2 with MST+HBR2 support from the GPU is
required for independent display output
When using a DisplayPort 1.1 video card the MSTMDP123DP
will act as splitter, automatically mirroring your video source
across all displays. Resolution limitations apply
Certain graphics adapters have limited MST support and will
only output to three displays in total. If more than three
monitors are attached the fourth will be disabled.
Power Center Tip Polarity Positive
Input Current 0.5 A
Input Voltage 110V-240V AC
Output Current 3A
www.startech.com
1 800 265 1844