User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Top View
- Bottom View
- Product Information
- Package Contents
- Requirements
- Installation
- Mounting
- Powering the Module
- Connecting Devices to the Bottom of the Module
- Audio Options
- HDMI In
- HDMI Out
- RJ45 Port (Network Device)
- USB-A Port
- Connecting Devices to the Top of the Module
- Connecting a Host Computer to the Module
- USB-C Port
- USB-B Port
- HDMI In Port (Pass Through)
- USB-A Port
- LED Indicators
- Power
- RJ45 Port
- Configuration
- Configuring a Display
- Display Preference
- Connectivity Diagram
14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Connecting a Device to the USB-A Port
1. Connect a USB-A Cable to the USB-A Port on the top of the Docking
Station Module.
2. Connect the other end of the USB-A Cable to a USB-A Port on the USB
Device.
Note: The USB-A Port can only fast-charge devices that comply with USB
Battery Charging Specication Revision 1.2.
LED Indicators
Power
Solid LED (White)
• Indicates that the Docking Station Module is active (the Universal Power
Adapter is correctly connected to an AC Electrical Outlet).
LED O
• Indicates that the Power Button is turned o, Universal Power Adapter is
not correctly connected to an AC Electrical Outlet or the Docking Station
Module is not receiving power from the AC Electrical Outlet.
RJ45 Port
Amber LED
• Solid LED
• Indicates that link speed is either 1000Mbps (1 GbE), 100Mbps, or 10Mbps
• LED O
• Indicates no connectivity
Green LED
• Flashing LED
• Indicates that a link is established
• LED O
• Indicates that no link is established