User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Top View
- Bottom View
- Product Information
- Package Contents
- Requirements
- Installation
- Mounting
- Powering the Module
- Connecting Devices to the Bottom of the Module
- Audio Options
- HDMI In
- HDMI Out
- RJ45 Port (Network Device)
- USB-A Port
- Connecting Devices to the Top of the Module
- Connecting a Host Computer to the Module
- USB-C Port
- USB-B Port
- HDMI In Port (Pass Through)
- USB-A Port
- LED Indicators
- Power
- RJ45 Port
- Configuration
- Configuring a Display
- Display Preference
- Connectivity Diagram
11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
RJ45 Port (Network Device)
1. Connect a CAT5e/CAT6 Cable’s RJ45 Connector to the RJ45 Port on the
bottom of the Docking Station Module.
2. Connect the other RJ45 Connector to an RJ45 Port on your compatible
Network Device.
USB-A Port
The three USB-A Ports on the bottom of the Docking Station Module can use
to connect compatible USB devices. These ports can be used to connect Media
Devices (External Media Drive) or can be used to connect peripheral devices for
use with the connected Host Computer (e.g. Keyboard, Mouse, Web Camera,
etc.).
1. Connect a USB-A Cable to the USB-A Port on the bottom of the Docking
Station Module.
2. Connect the other end of the USB-A Cable to a USB-A Port on your
compatible device.
Connecting Devices to the
Top of the Module
Connecting a Host Computer to the Module
There are two dierent congurations you can use when connecting a host
device to the Docking Station Module. You can either use the USB-C Port or
the USB-B Port depending on the Host Computer’s port conguration.
Note: When connecting a Host Computer it is recommended to use either
the USB-C Port or the USB-B Port. The USB-C and USB-B Ports should
not be used in a setup together.