Docking Station Module BOX4MODULE | BEZ4MOD Actual product may vary from photos User Manual SKU#: MOD4DOCKACPD For the latest information and specifications visit www.startech.
Compliance Statements FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Statements Safety Measures • Wiring terminations should not be made with the product and/or electric lines under power. • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
Warning Statements Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage. Never use this product if parts are missing or damaged. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Table of Contents Compliance Statements.........................................................................1 Safety Statements...................................................................................2 Warning Statements...............................................................................3 Product Diagram.....................................................................................4 Top View.......................................................................................
HDMI In Port (Pass Through).................................................................................................................. 13 USB-A Port.................................................................................................................................................... 13 LED Indicators..........................................................................................14 Power............................................................................................
Product Diagram Actual product may vary from photos Top View LED Power Indicator Button USB-A Port (Power) USB-B Port (Host) Video In Port USB-C Port (Host) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Bottom View HDMI Mic In In Port Port DC 20V HDMI Spearker 6A Port Out Port Out Port USB-A Ports RJ45 Port To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Package Contents • • • • • • • • • Docking Station Module x 1 Universal Power Adapter x 1 Power Cords (NA / UK / EU) x 3 USB-A to USB-B Cable x 1 USB-C Cable x 1 Mounting Bracket x 1 Bracket Screws (M5 x 20 mm) x 4 Module Screws (#6-32 x 3/16) x 8 Quick-Start Guide x 1 Requirements For the latest requirements, please visit www.startech.com/MOD4DOCKACPD. Installation: • Table Surface for Installation. • HDMI enabled Display Device w/ HDMI Cable (e.g. Television, Projector).
Display: • 4K capable display with cables is required to achieve 4096 x 2160p resolution (4K is also known as 4K x 2K). • HDMI capable display with cables. Note: Video output capabilities are dependent on the video card and hardware specifications of the connected Host Computer. Devices: • USB-A devices (e.g. Keyboard, Mouse, etc.). • Microphone with a 3.5 mm audio connection. • Speakers with a 3.5 mm audio connection. Operating Systems: • Windows 10, 8, and 7 • macOS 10.13, 10.12, and 10.
Installation Note: StarTech.com is not responsible for any damages related to the instal- lation of this product. See the Installation section in the Modular Table Box (BOX4MODULE) or Single-Module Table Box (BEZ4MOD) User Manual for instructions on how to install a module (found at www.startech.com/BEZ4MOD or www.startech.com/ BOX4MODULE).
5. Mark the location of the Mounting Holes using a Writing Utensil. These marks can be used as a guide to indicate where the Mounting Screws will be installed in the surface. 6. Install the Bracket Screws (x4) through the Mounting Bracket and into the mounting surface, using a Phillips Head Screwdriver. Be careful not to overtighten.
2. Connect the other end of the 3.5 mm Audio Cable to the Audio In Port on the Audio Device. Mic In: The Mic In Port is used to connect a Microphone to the Docking Station Module for use with a Host Computer. 1. Connect a 3.5 mm Audio Cable in the Mic In Port on the bottom of the Docking Station Module. 2. Connect the other end of the 3.5 mm Audio Cable to the Connector (e.g. XLR Connector) on the bottom of the Microphone. HDMI In The HDMI In Port is used to connect an HDMI Device (e.g.
RJ45 Port (Network Device) 1. Connect a CAT5e/CAT6 Cable’s RJ45 Connector to the RJ45 Port on the bottom of the Docking Station Module. 2. Connect the other RJ45 Connector to an RJ45 Port on your compatible Network Device. USB-A Port The three USB-A Ports on the bottom of the Docking Station Module can use to connect compatible USB devices. These ports can be used to connect Media Devices (External Media Drive) or can be used to connect peripheral devices for use with the connected Host Computer (e.g.
USB-C Port The USB-C Port will allow the Host Computer to connect to any device that are connected to the Docking Station Module while charging the connected device. Notes: If the Host Computer’s USB-C Port does not support DP Alt Mode, the Host Computer must be connected to the HDMI In Port as well as the USB-C Port on the top of the Docking Station Module, in order to use the Docking Station Module’s video functionality.
Installing the DisplayLink Driver If using the USB-B Port to connect the Host Computer to the Docking Station Module, you will need to download and install the DisplayLink driver in order for the Host Computer to properly function. 1. Using a web browser, navigate to www.startech.com/MOD4DOCKACPD. 2. On the Product page, click the Support tab located in the middle of the screen. 3.
Connecting a Device to the USB-A Port 1. Connect a USB-A Cable to the USB-A Port on the top of the Docking Station Module. 2. Connect the other end of the USB-A Cable to a USB-A Port on the USB Device. Note: The USB-A Port can only fast-charge devices that comply with USB Battery Charging Specification Revision 1.2. LED Indicators Power Solid LED (White) • Indicates that the Docking Station Module is active (the Universal Power Adapter is correctly connected to an AC Electrical Outlet).
Configuration Configuring a Display Video output capabilities are dependent on the video card and hardware specifications of the connected Host Computer. Note: Navigating to the Settings screen will vary depending on the operating system (OS) or operating system version running on the host laptop. Windows: 1. Right-click on the Desktop and select Screen Resolution or Display Settings (depending on the OS version) from the pop-up menu. 2.
Make this My Main Display: • Select this checkbox to mark the current display as the main or primary display. When using the other display types, the main display will either be extended (Extend desktop to this display) or Duplicated (Duplicate this display). Resolution: • The number of pixels rendered on the display measure as width x height (e.g. 1920 x 1080). To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Connectivity Diagram To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
