Spec Sheet

• Open SFP slot lets you customize your connection mode or distance using most MSA-Compliant transceivers
• Ideal for secure connections required by government or corporations where EMI is not acceptable
Features
• Convert between an RJ45 copper Ethernet connection and a fiber optic connection to extend your network
cost-effectively
• Gigabit Open SFP slot to customize the network extension distance to your requirements with virtually any
MSA-compliant multi or single mode transceiver
• 10/100/1000 Mbps compatible RJ45 port supports auto negotiation to bridge different network speeds and devices
to a Gigabit fiber network
• Compact standalone design and wall mounting option for easy and convenient installation
• Link Fault Pass (LFP) supported
• Durable metal housing
• Auto MDIX
• 9K Jumbo Frame supported
• Supports IEEE 802.1q Tag VLAN pass through
Hardware
Warranty
PoE
WDM
Industry Standards
Industry Standards
Industry Standards
Industry Standards
Industry Standards
2 Years
No
No
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-SX
IEEE 802.3z 1000BASE-LX
Performance
Maximum Data Transfer
Rate
Type
Type
Fiber Operating Mode
Compatible Networks
Auto MDIX
MTBF
1 Gbps
Multi Mode
Single Mode
Full-Duplex
10/100/1000 Mbps
Yes
> 50,000 hours at 25C
Connector(s)
Local Unit Connectors
Local Unit Connectors
RJ-45
SFP Slot
Special Notes /
Requirements
Note
Fiber data transfer speeds and distances are dependent on the SFP
transceiver used (sold separately)