User Manual

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Set the Tilt of the TV

1. Fully hand-tighten the top M8 x 20 mm Screw on each

Upper Column. (Figure 9)

2. Loosen the top two M8 x 20 mm Screws on each Upper

Column by a quarter turn, using the 5 mm Hex Key.

Warning! Do not over-loosen or remove the M8 x 20 mm

Screws.

3. Tilt the TV to the desired setting and align the two lower

holes in the VESA Mounting Plate with the holes in the

Upper Columns.

4. Insert two M8 x 20 mm Screws through the holes in the

VESA Mounting Plate and into the Upper Columns and

tighten, using the 5 mm Hex Key.

5. Tighten the top two M8 x 20 mm Screws, using the 5 mm

Hex Key.

Figure 9

M8 x

20 mm

Screws

5 mm

Hex

Key