Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Mobile TV Cart, Portable Rolling TV Stand for 37-70" VESA Display (154lb/70kg), with Shelf & Storage Compartment, Rotate/Tilt Display, Universal TV Mount on Casters/Wheels Mobile TV Stand w/ Casters - cart - for flat panel
21222324252627282930
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note: Not all TVs will have placeholder VESA Hardware.
Only remove the four Screws for the VESA Mount. Do not
remove any of the screws from the TV’s structural assembly.
3. (Optional -- for TVs with recessed VESA Mounting
Holes, for TVs with uneven rear geometry, or to adjust
the engagement depth of the provided Screws) Add the
necessary number of Small and/or Large Spacers between
the VESA Mounting Plate and TV.
4. Align the VESA Mounting Holes in the VESA Mounting
Plate with the VESA Mounting Holes in the TV. The
Directional Arrow on the VESA Mounting Plate should be
pointing towards the top of the TV.
5. Place a Rectangular Washer over each VESA Mounting
Hole.
6. Thread the appropriately sized M-Type Screws (e.g. M5 x
14 mm Screws) through the Rectangular Washers, VESA
Mounting Plate, (Optional) Spacers, and into the TV.
Note: Each Rectangular Washer features two holes. Select
the hole that ts the M-Type Screws.
7. Tighten the M-Type Screws, using a Phillips Head
Screwdriver, until each Screw sits ush with the surface of
the TV Mounting Brackets.
Warning! Do not overtighten the M-Type Screws. If any
unexpected resistance is encountered while fastening these
Screws, immediately stop and attempt to use a
dierent length of M-Type Screw.