User Manual

3. Angle the Equipment Shelf and slide the notch from one

side against one of the Upper Columns and the Shelf

Bracket. Tilt the other notch down onto the other Shelf

Bracket. The large overhanging portion should be facing the

rear of the Mobile Cart. (Figure 5.2)

4. Insert two M6 x 12 mm Screws through the bottoms of both

Shelf Brackets and into the Equipment Shelf and tighten,

using a Phillips Head Screwdriver. (Figure 5.3)

5. Tighten the two M8 x 20 mm Screws installed in step 2 of

Attach the Base Columns to the Base, using the 5 mm Hex

Key. (Figure 5.4)

(Optional -- For TVs with 600 x 200 mm or 600 x

400 mm Spaced VESA Mounting Holes) Attach the

VESA Extension Arms to the VESA Mounting Plate

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Figure 6

VESA

Mounting

Plate

VESA

Extension

Arms

M8 x 8 mm

Screws

5 mm

Hex Key