User Manual

12
Install the Front Cover and Equipment Shelf
1. Align the holes in the sides of the Front Cover and the four
lowest inward facing holes on the Upper Columns. The
Directional Arrow on the Front Cover should be pointing
up and should only be visible from the rear of the Mobile
Cart. (Figure 5.1)
2. Thread all four M6 x 12 mm Screws through the holes in
the Front Cover and into the Upper Columns then tighten,
using a Phillips Head Screwdriver.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 5
Front Cover
Equipment
Shelf
M6 x 12
mm Screws
M6 x 12
mm Screws
M8 x
20 mm
Screws
5 mm Hex
Key