User Manual

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Attach the Base Columns to the Base

1. Insert the Base Columns into the Base. Press rmly to

ensure the Base Columns have been fully inserted into the

Base. (Figure 3)

Note: Ensure the Cable Management Slots on each of the

Base Columns are facing the rear of the Mobile Cart and

are at the same height.

2. Insert two M8 x 20 mm Screws through the bottom of the

Base and into both Base Columns and partially tighten,

using the 5 mm Hex Key. These M8 x 20 mm Screws will be

tightened in another installation step.

Figure 3

Base

Cable

Management

Slots

M8 x 20

mm Screws

5 mm

Hex Key

Base

Columns