User Manual

9
Installation
Note: Do not overtighten any of the screws.
Attach the Casters
1. Flip the Base upside down and place it onto a clean and at
surface. (Figure 1)
Note: Cover hard oors with a soft cloth to prevent
scratching.
2. Insert the four Casters into the holes, located in the bottom
of the Base and tighten, using the 10 mm Wrench.
3. Flip the Base upright.
4. Lock the Casters by pressing down on the Brake, located on
top of each of the four Casters. (Figure 2)
5. (For uneven surfaces) Flip the Base upside down and use the
Wrench to adjust the Nut located on each Caster.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Casters
Base
Figure 1
Figure 2
Brake