User Manual

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Lock to a Laptop
1. Place the looped end of the cable around the secure object
that you’re attaching the cable to, and pull the lock through
the loop. (Figure 3)
2. Turn the dials on the lock until the combination is displayed
in the combination display.
Note: The factory preset lock combination is 0-0-0-0. You
should change the combination to a more secure series of
numbers. For more information, see the “Set the lock combi-
nation” section.
3. Slide the button on the lock in the direction of the arrow on
the button and hold the button in place.
4. Insert the T-shaped projection into the security-lock slot
on your laptop, rotate the lock 90, and release the button.
(Figure 4)
5. Turn the dials on the lock so that the combination isn’t
displayed in the combination display.