User Manual

6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Setting a New Combination
The factory preset lock combination is 0-0-0-0. For increased
security, you should change the combination to a more secure
series of numbers.
1. Align the numbers on the Dial with the Guide Line using the
default combination 0-0-0-0.
2. Push the cable in towards the lock and hold it in place.
(Figure 1)
3. Turn the dials on the lock to the new combination that you
want to set. (Figure 2)
4. Release the cable.
5. For added security, turn the dials so that the combination
isn’t displayed in the combination display.
Tip! Write down the combination and keep it in a safe place.
Resetting the Combination
1. Align the numbers on the Dial with the Guide Line using the
current combination.
2. Push the cable in towards the lock and hold it in place.
3. Turn the dials on the lock to the new combination that you
want to set.
4. Release the cable.
Caution: Be careful when handling the cable, as it is
easy to accidently push the cable towards the lock,
changing the current combination.