User Manual

ManualsBrandsStartech ManualsComponents & AccessoriesStarTech.com Universal DC Power Adapter Industrial USB Hubs - 20V, 3.25A - power adapter

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 18, 2019 11:29 AM

Product Diagram (ITB20D3250)

Component Function

1 Power Connector (side) • Used to power the Adapter.

2 LED Indicator

• Solid: Indicates that the Adapter is powered

On.

• O: Indicates that the Adapter is not receiving

power.

3 Terminal Block Wires

• Used to connect and power a Device.

• Red Wire = Positive

• Black Wire = Negative

• Output = 20V

• Current = 3.25A 65W

Requirements

For the latest requirements, please visit www.startech.com/ITB20D3250

• (Optional) Small Flat Head Screwdriver x 1

• Device with a Two or Three Conductor Terminal Block Connector x 1

Using the Two Conductor Terminal Block Connector

1. Remove the Two Conductor Terminal Block Connector from the Device, you want

to power.

2. Plug the Two Conductor Terminal Block Connector on the Adapter into the

Terminal Connector on the Device.

Note: Ensure the polarity of the input power is correctly matched with the Terminal

Block Pins to ensure proper functionality. Refer to the Device’s vendor manual for

further information on properly wiring the Device.

Universal 65W DC Power Adapter | 20V 3.25A | Industrial

Two Conductor Terminal Block Connector

Using the Three Conductor Terminal Block Connector

1. Using a small screwdriver (Flat Head), loosen the screws on the Two Conductor

Terminal Block Connector and carefully remove the Terminal Block Wires from

the Two Conductor Terminal Block Connector.

2. Using a small screwdriver, loosen the screws on the Three Conductor Terminal

Block Connector (included) and carefully insert the Terminal Block Wires into the

Three Conductor Terminal Block Connector (Red Wire = Positive and Black Wire =

Negative).

Note: Ensure the polarity of the input power is correctly matched with the Terminal

Block Pins to ensure proper functionality. Refer to the Device’s vendor manual for

further information on properly wiring the Device.

3. Tighten the screws on the Three Conductor Terminal Block Connector, to secure

the Terminal Block Wires into the Three Conductor Terminal Block Connector.

Three Conductor Terminal Block Connector

4. Plug the Three Conductor Terminal Block Connector on the Adapter into the

Terminal Connector on the Device.

Powering the Adapter

• Connect the Power Cord to the Power Connector on the Adapter and to an AC

Electrical Outlet.

Summary of content (2 pages)

PAGE 1
Quick-Start Guide Universal 65W DC Power Adapter | 20V 3.25A | Industrial Product Diagram (ITB20D3250) 1 3 Two Conductor Terminal Block Connector 2 Using the Three Conductor Terminal Block Connector Component Function 1 Power Connector (side) • Used to power the Adapter. 2 LED Indicator • Solid: Indicates that the Adapter is powered On. • Off: Indicates that the Adapter is not receiving power. 3 Terminal Block Wires • • • • • Used to connect and power a Device.
PAGE 2
Connecting the Adapter to a Terminal Block 1. Before terminating the Adapter make sure that the Adapter is disconnected from the Power Cord. 2. Refer to the vendor manual that came with the Device in order to properly terminate the Adapter. Note: The Terminal Wires are Red Wire = Positive and Black Wire = Negative. The Output is 20V and the Current is 3.25A 65W.