User Manual
Table Of Contents
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Installing the Tilt Adjustment Knobs
- Installing the Bubble Level
- Mounting the Wall Bracket
- Attaching the Vertical Brackets (Flush Mounting)
- Recessed Mounting
- Spacer Combination
- Mounting the TV
- Adjusting the Tilt
- Removing the TV
23
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting the TV
Warnings! Make sure that the weight of the TV doesn’t
exceed the weight capacity of this product. This product can
support the following weight: Up to 75 kg (165 lb.).
Attaching the TV is a two-person job. Do not attempt to
complete this task by yourself.
1. One person holds one side of the TV, (one person per side).
2. Carefully lift up the TV and slightly tilt the top of the TV
toward the mounting surface. Hook the top of both Vertical
Brackets (at the same time) to the top edge of the Wall
Mount.
3. Once the top of the Vertical Brackets are secured in place,
gently lower the bottom of the TV until the bottom of the
Vertical Brackets comes in contact with the Wall Bracket.
4. While applying light pressure, push the bottom of the
TV into the Wall Bracket until you hear an audible click,
indicating that the TV has been mounted to the Wall
Bracket successfully.
Warning! Do not let go of the TV until you are sure that it’s
properly hooked onto the wall mount.