User Manual
Table Of Contents
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Installing the Tilt Adjustment Knobs
- Installing the Bubble Level
- Mounting the Wall Bracket
- Attaching the Vertical Brackets (Flush Mounting)
- Recessed Mounting
- Spacer Combination
- Mounting the TV
- Adjusting the Tilt
- Removing the TV
18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. The TV Wall Mount can be mounted using the Mounting
Hardware included.
Attaching the Vertical Brackets
(Flush Mounting)
To accommodate dierent TV designs, the TV Wall Mount
comes with ve sets of screws of dierent lengths and
diameters, washers with two hole sizes, and two sizes of
spacers.
1. Determine the depth and diameter of the mounting holes
located on the back of the TV.
2. Once you determine the correct depth and diameter of the
hardware needed.
Note: The Spacers can be used if the included screws are
too long for the TV Mounting Holes.
3. Align one of the Vertical Brackets (with the Adjustment
Knob facing outward) with the Mounting Holes of the back
of the TV.
4. Place the Rectangular Washers over the Screw Holes on
the Vertical Bracket.