User Manual

17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Align one of the Vertical Brackets with the Spacers. Place a
Rectangular Washer over the Screw Holes on the Vertical
Bracket.
4. Insert either the M8x50 mm, M6x30 mm, or M8x30 mm
Screws (depending on the hardware requirement), through
the Rectangular Washers, Vertical Brackets, and into the TV.
Spacer Installation
5. Use a Phillips Head Screwdriver to tighten the screws. Do
not over-tighten the screws.
Note: Do not over-tighten the screws. If you encounter
resistance while youre tightening the screws, stop tightening.
Failure to do so could result in damage to the TV.