User Manual
Table Of Contents
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Insert either the M5x14 mm or M6x14 mm Screws
(depending on the hardware requirement), through the
Rectangular Washers, Vertical Brackets, and into the TV.
Securing the Vertical Bracket
5. Use a Phillips Head Screwdriver to tighten the screws. Do
not over-tighten the screws.
Note: If you encounter resistance, stop tightening. Failure to
do so could result in damage to the TV.
Recessed Mounting
1. Determine the depth and diameter of the mounting holes
located on the back of the TV.
2. Once you determine the correct depth and diameter of the
hardware needed, Place the Spacers (depending on your TV
conguration) over the Screw Holes on the back of the TV.
Note: Refer to the Spacer Combination table for dierent
hardware combinations.