User Manual

13
3. Insert the Screws back into the bottom of the TV Mounting
Brackets. Tighten using a Phillips Head Screwdriver.
(Figure 8)
Operation
Adjust the TV
Caution! Ensure that your ngers are clear from all moving
parts and pinch points while adjusting your TV.
Adjust the Rotation
Note: It is recommend that two people should complete the
following rotation adjustment steps.
1. Partially loosen the four Nuts, located on the back of the
H-Bracket, using the Wrench.
Figure 8
Phillips Head
Screwdriver
Screw
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support