Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com TV Wall Mount supports up to 100 inch VESA Displays, Low Profile Full Motion TV Wall Mount for Large Displays, Heavy Duty Adjustable Tilt/Swivel Articulating Arm Bracket Cable Management - bracket - full-motion adjustable arm - for TV
11121314151617181920
9
6. Insert one Mounting Plate behind the bottom of the
TV Wall Mount Assembly, where the TV Wall Mount
Assembly makes contact with the Wall Mounting Bracket.
Ensure the Mounting Plate is oriented so that the two
bumps are pointing downwards.
7. Align the holes in the Mounting Plate with those found
in the TV Wall Mount Assembly and the Wall Mounting
Bracket.
8. While holding the Mounting Plate in place, insert three M6
x 15 mm Hex Screws through three Small Round Washers
and into the holes in the bottom of the TV Wall Mount
Assembly, Wall Mounting Bracket, and Mounting Plate.
9. Tighten all seven M6 x 15 mm Hex Screws with the Hex
Key.
Attach the Decorative Covers
• Attach the upper and lower Decorative Covers by sliding
each Decorative Cover onto the TV Wall Mount Assembly,
until you hear or feel the Tabs of each Decorative Cover
snap into place. (Figure 4)
Decorative
Cover
Figure 4