Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com TV Wall Mount supports up to 100 inch VESA Displays, Low Profile Full Motion TV Wall Mount for Large Displays, Heavy Duty Adjustable Tilt/Swivel Articulating Arm Bracket Cable Management - bracket - full-motion adjustable arm - for TV
11121314151617181920
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
Fasten the Wall Mounting Bracket to a Wall
Warning! The TV Wall Mount is designed to be installed
on a wood stud, solid concrete, or cinder block wall. The
wall structure should be capable of supporting at least four
times the weight of the mounted equipment. The Mounting
Hardware included with this product may not be adequate
for installation on certain wall structures. Contact a construc-
tion professional to install the TV Wall Mount. Failure to do
so may result in personal injury and/or equipment damage.
• FPWARTS2 can be mounted using the Mounting Hardware
included. Verify that the Wall Mount Bracket is level with a
Spirit/Bubble Level before fastening it to your Mounting
Surface.
Attach the TV Wall Mount Assembly
1. Lift the TV Wall Mount assembly up and towards the Wall
Mounting Bracket.
2. Hook the top of the TV Wall Mount Assembly onto the top
edge of the Wall Mounting Bracket.
3. Lower the bottom portion of the TV Wall Mount Assembly
until it makes contact with the Wall Mounting Bracket.
(Figure 1)