Flat-Screen TV Wall Mount Articulating - 32 - 55” FPWARTB1M *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com JP: 取扱説明書 - jp.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/FPWARTB1M.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries. This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.
Warning statements Mensagens de aviso Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage. Certifique-se de que monta este produto de acordo com as instruções. O incumprimento pode resultar em ferimentos pessoais ou danos de propriedade. Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience personal injury or damage to the equipment.
Table of Contents Technical specifications.........................................................................1 Package contents....................................................................................................................................... 2 Requirements.............................................................................................................................................. 5 Installation.......................................................................
Technical specifications Unless otherwise indicated, the technical specifications in the table below apply to the TV or display. Type of measurement Measurement 100x100 100x150 200x100 200x200 300x200 300x300 400x200 400x300 400x400 VESA mounting hole pattern on the TV mount Weight capacity of TV mount 35 kg (77 lb.
Package contents 1 2 Wall mount VESA extension brackets Qty: One Qty: Four 4 3 Wrench Bracket screws Qty: One Qty: Four 5 Instruction manual 6 Nuts M5x14 mm screws Qty: Four Qty: Four 2
8 7 M6x14 mm screws M6x30 mm screws Qty: Four Qty: Four 9 10 M8x30 mm screws M8x50 mm screws Qty: Four Qty: Four 12 11 Instruction manual Small washers Large washers Qty: Four Qty: Four 3
13 14 Small spacers Large spacers Qty: Eight Qty: Eight 15 16 Screws Concrete anchors Qty: Four Qty: Four 17 18 Bracket washers Instruction manual Qty: Four Qty: One Instruction manual 4
Requirements • A display or TV that is compatible with one of the VESA mounting hole patterns FPWARTB1M supports • A Phillips screwdriver Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/FPWARTB1M.
Installation Prepare FPWARTB1M for mounting 1. Remove the center decorative cover from the wall mount. 2. Remove the top and bottom decorative covers from the wall mount. 3. Use the wrench provided to remove one bolt from the front of the wall mount and slide the TV mount up and away from the wall mount.
Attach the wall mount to the wall The wall mount is designed to be installed on a wood stud, solid concrete, or cinder block wall. The wall structure should be capable of supporting at least four times the weight of the mounted equipment. The mounting hardware included with this product may not be adequate for installation on certain wall structures.
Reattach the decorative covers 1. When the wall mount is attached to the wall, snap the top and bottom decorative covers back onto the wall mount. 2. Snap the center decorative cover onto the wall mount.
Assemble the TV mount If the mounting holes on the TV mount aren’t compatible with the mounting holes on your TV or display, you can use the VESA mount extensions to create a compatible mounting hole configuration.
B Screw Nut Wrench Instruction manual 10
C Screw Nut Wrench Instruction manual 11
Mount a TV with a flush mounting surface To accommodate different TV designs, the FPWARTB1M comes with five sets of screws of different lengths and diameters, two sizes of washers, and two sizes of spacers. 1. To select the combination of mounting hardware that you need to use to attach the VESA mount extensions to the TV, complete the following: • Determine the depth of the mounting holes on the TV. • Determine the diameter of the mounting holes on the TV.
Mount a TV with a recessed mounting surface To accommodate different TV designs, the FPWARTB1M comes with five sets of screws of different lengths and diameters, two sizes of washers, and two sizes of spacers. 1. To select the combination of mounting hardware that you need to use to attach the TV mount or the VESA mount extensions to the TV, complete the following: • Determine the depth of the mounting holes on the TV. • Determine the diameter of the mounting holes on the TV.
2. Position the end of the TV mount with the circle closest to the top edge of the TV. 3. Line up the TV mount or the VESA mount extensions with the mounting holes on the back of the TV. 4. Place the small or large washers over the TV mount or the VESA mount extensions. 5. Insert the M6x30 mm screws, M8x30 mm screws, or M8x50 screws through the washers, TV mount or VESA mount extensions, spacers, and into the back of the TV. 6. Use a Phillips screwdriver to tighten the screws.
Attach the TV to the wall mount Warning! Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience personal injury or damage to the product. This product can support the following weight: Up to 35 kg (77 lb.) Warning! Attaching the TV is a two-person job. Do not attempt to complete this task by yourself. 1. Carefully slide the TV mount onto the mount attachment at the end of the wall mount. 2.
Route the cables 1. Remove the decorative covers from the arms of the wall mount. 2. Position the cables in the decorative covers and reattach them to the arms of the wall mount.
Adjust the tilt and swivel angle of the TV 1. Use the provided wrench to loosen the bolts in the side of the TV mount. 2. Position the TV at the angle that you want. 3. Use the provided wrench to tighten the bolts in the side of the TV mount.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a five-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
