User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Specifications
- Requirements
- Installation
- Mounting the Ceiling Mount and Upper Pole Assembly
- Assembly
- Attaching the Extension Pole to the Upper Pole
- Attaching the Horizontal Bracket
- Selecting the Appropriate Mounting Hardware
- Attaching the Vertical Brackets to a TV
- Attaching the Vertical Brackets to a TV Using Spacers
- Attaching the TVs to the Horizontal Bracket
- Adjusting the TVs
- Adjusting the tilt
- Adjusting the Swivel
- Adjusting the Vertical Position of the Ceiling TV Mount
23
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Insert the Screws through the Washers and Vertical
Brackets, and into the back of the TV.
Attaching the Vertical Brackets
5. Use a Phillips Head Screwdriver to tighten the Screws. Be
careful not to over-tighten the Screws.
Attaching the Vertical Brackets
to a TV Using Spacers
If you’re attaching a TV with an inset mounting surface:
1. Place the TV on a secure at surface with the screen facing
down. Align the Mounting Holes on the Vertical Brackets
with the Mounting Holes on the back of the TV.
2. Align four Washers (use the appropriate Washer hole size)
with the Mounting Holes on the Vertical Brackets. Make
sure that the Hinge on each of the Vertical Brackets opens
downward.