User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Specifications
- Requirements
- Installation
- Mounting the Ceiling Mount and Upper Pole Assembly
- Assembly
- Attaching the Extension Pole to the Upper Pole
- Attaching the Horizontal Bracket
- Selecting the Appropriate Mounting Hardware
- Attaching the Vertical Brackets to a TV
- Attaching the Vertical Brackets to a TV Using Spacers
- Attaching the TVs to the Horizontal Bracket
- Adjusting the TVs
- Adjusting the tilt
- Adjusting the Swivel
- Adjusting the Vertical Position of the Ceiling TV Mount
22
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching the Vertical Brackets to a TV
Warning! Do not over-tighten the screws. If you encounter
resistance while you are installing the screws, stop tighten-
ing. Failure to do so could result in damage to the TV.
1. Using a Phillips Head Screwdriver, remove the Bracket
Screw from the Hinge on each of the Vertical Brackets and
open the Hinge.
Removing Bracket Screw
2. Place the TV on a secure at surface with the screen facing
down. Align the Mounting Holes on the Vertical Brackets
with the Mounting Holes on the back of the TV. Make sure
that the Hinges on the Vertical Brackets open downward.
3. Align one Washer (use the appropriate Washer hole size)
over each of the Mounting Holes on the Vertical Brackets.