User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Specifications
- Requirements
- Installation
- Mounting the Ceiling Mount and Upper Pole Assembly
- Assembly
- Attaching the Extension Pole to the Upper Pole
- Attaching the Horizontal Bracket
- Selecting the Appropriate Mounting Hardware
- Attaching the Vertical Brackets to a TV
- Attaching the Vertical Brackets to a TV Using Spacers
- Attaching the TVs to the Horizontal Bracket
- Adjusting the TVs
- Adjusting the tilt
- Adjusting the Swivel
- Adjusting the Vertical Position of the Ceiling TV Mount
19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Align the three Threaded Studs on the Horizontal Bracket
with the Mounting Hole and Mounting Slots on the
Mounting Bracket.
3. Reattach the Retainer Nut removed in Step 1 and use a
Wrench to tighten the Retainer Nut and the other two Nuts
that were loosened in Step 1.
Attaching the Mounting Bracket to the Horizontal Bracket
4. Repeat Steps 1 - 3 to install the other Horizontal Bracket.
Selecting the Appropriate Mounting Hardware
• Determine if the back of the TV is ush or inset.
• Determine the depth of the mounting holes on the TV.
• Determine the diameter of the mounting holes on the TV.
Note: If you’re using a TV with a ush mounting surface, you
don’t need to use any of the provided spacers.