User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Specifications
- Requirements
- Installation
- Mounting the Ceiling Mount and Upper Pole Assembly
- Assembly
- Attaching the Extension Pole to the Upper Pole
- Attaching the Horizontal Bracket
- Selecting the Appropriate Mounting Hardware
- Attaching the Vertical Brackets to a TV
- Attaching the Vertical Brackets to a TV Using Spacers
- Attaching the TVs to the Horizontal Bracket
- Adjusting the TVs
- Adjusting the tilt
- Adjusting the Swivel
- Adjusting the Vertical Position of the Ceiling TV Mount
18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. Insert two Bolts through the Adjustment Holes on
the Upper Pole and into the Adjustment Holes on the
Extension Pole.
Installing the Nuts/Bolts through the Adjustment Holes
7. Screw one Nut onto the end of each of the Bolts and use the
Wrench to hold the Nuts in place while using the Hex Key
to tighten the Bolts.
Attaching the Horizontal Bracket
1. Using a Wrench, remove the Retainer Nut and loosen the
other two Nuts on the Horizontal Bracket.
Removing the Retainer Nut and Loosen the two other Nuts