Ceiling TV Mount | Back-to-Back | Dual Display Actual product may vary from image shown User Manual SKU#: FPCEILBTB For the latest information and specifications visit www.startech.
Compliance Statements Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.
Safety Statements Safety Measures • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. Mesures de sécurité • L’installation et/ou le montage du produit doit être réalisé par un professionnel certifié et dans le respect des normes locales et du code de construction local.
Säkerhetsåtgärder • Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt gällande lokala förordningar för säkerhet och byggnormer. • Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för snubblingsolyckor och andra olyckor kan undvikas. Warning Statements • Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage.
Avertissements • Assemblez ce produit conformément aux instructions. Si vous ne respectez pas ces instructions, vous risquez de vous blesser ou d’endommager l’équipement. • N’utilisez pas ce produit si des pièces sont endommagées ou manquantes. • Les types de plafonds varient. Vous devez impérativement vérifier que le type de plafond et le matériel de fixation que vous utilisez permettent de soutenir correctement l’équipement.
Dichiarazioni di avvertenza • Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle istruzioni potrebbe causare danni a persone o proprietà. • Non utilizzare il prodotto in presenza di parti mancanti o danneggiate. • Le caratteristiche il soffitto sono variabili ed è importante verificare che il soffitto e l’hardware di montaggio in uso siano in grado di supportare adeguatamente le apparecchiature montate.
determinar con certeza que el tipo de estructura del falso techo y el hardware de montaje que se va a utilizar para soportar debidamente el equipo. De lo contrario, se pueden producir lesiones personales o daños en el mismo. La estructura del falso techo debe ser capaz de soportar al menos cuatro veces el peso del componente instalado. • El hardware de montaje incluido con este producto puede no ser adecuado para algunas estructuras de falso techo.
注意 • 必ず取扱説明書に従って本製品の組み立てを行って下さい。 • 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。 • 本製品は、非常に重いエンクロージャです。絶対に一人で持ち上げたり動かしたりしないで下さ い。 • 転倒注意！本製品から複数のコンポーネントが突き出した状態にしておくとエンクロージャが転 倒する恐れがあります。転倒リスクを回避するために、エンクロージャからはコンポーネントが突 き出ないようにして下さい。 • 本製品の上に何も載せないで下さい。複数のエンクロージャを重ねて設置しないで下さい。 • 液体物をエンクロージャに近づけないようにして下さい。 • エンクロージャ自身と中に積載する装置の総重量に耐えられるエリアに設置して下さい。 • この製品にはアースが必要です。 アース接続をしていない状態で本製品を使用しないでくださ い。 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Table of Contents Compliance Statements.........................................................................1 Safety Statements...................................................................................2 Warning Statements...............................................................................3 Product Diagram.....................................................................................9 Product Information............................................................................
Product Diagram Ceiling Mount Upper Pole Extension Pole Vertical Brackets (4) Horizontal Brackets (2) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Package Contents 1 2 Ceiling Mount and Upper Pole Extension Pole Qty: 1 Qty: 1 3 4 Vertical Bracket Horizontal Bracket Qty: 4 Qty: 2 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
5 6 Bolts Nuts Qty: 2 Qty: 2 8 7 Wrench Hex Key Qty: 1 Qty: 1 9 10 Mounting Template M5x14 mm Screws Qty: 1 Qty: 8 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
12 11 M6x14 mm Screws M6x30 mm Screws Qty: 8 Qty: 8 14 13 M8x30 mm Screws M8x50 mm Screws Qty: 8 Qty: 8 16 15 Rectangular Washers Short Spacers Qty: 8 Qty: 16 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
18 17 Long Spacers 6.3x55 mm Screws Qty: 16 Qty: 4 20 19 Concrete Anchors Flat Washers Qty: 4 Qty: 4 21 Mounting Bracket Qty: 1 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Specifications Type of Measurement Measurement VESA mounting hole pattern 200x200 300x300 400x200 400x400 600x400 Weight capacity Up to 99 lb. per mount (45 kg per mount) Tilt +50 to -200 Extension pole swivel +1800 to -1800 Extension 42” to 61” (1060 to 1560 mm) Level adjustment +30 to -30 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Screen size 32” to 75” (813 to 1905 mm) Ceiling plate swivel -600 to +600 Requirements Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/FPCEILBTB • Flat-panel TV (max. 75”, VESA mount compatible) x 2 • Phillips Head Screwdriver x 1 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Installation Mounting the Ceiling Mount and Upper Pole Assembly Notes: Product mounting should be completed by a certified professional as per the local safety and building code guidelines. Ceiling structures vary, and it’s important to make sure that the type of structure and mounting hardware that you’re using will properly support the mounted equipment. Failure to do so may result in personal injury and/or equipment damage. 1.
Note: At this step in the installation process, the Upper Pole is not attached to the Extension Pole. 3. Feed the TV Cables through the Extension Pole, and out the Cable Hole in the bottom of the Extension Pole. Feeding the TV Cables through the Poles 4. Slide the Extension Pole into the Upper Pole, until the Extension Pole is at the desired height. 5. Align the Adjustment Holes on the Extension Pole with the Adjustment Holes on the Upper Pole.
6. Insert two Bolts through the Adjustment Holes on the Upper Pole and into the Adjustment Holes on the Extension Pole. Installing the Nuts/Bolts through the Adjustment Holes 7. Screw one Nut onto the end of each of the Bolts and use the Wrench to hold the Nuts in place while using the Hex Key to tighten the Bolts. Attaching the Horizontal Bracket 1. Using a Wrench, remove the Retainer Nut and loosen the other two Nuts on the Horizontal Bracket.
2. Align the three Threaded Studs on the Horizontal Bracket with the Mounting Hole and Mounting Slots on the Mounting Bracket. 3. Reattach the Retainer Nut removed in Step 1 and use a Wrench to tighten the Retainer Nut and the other two Nuts that were loosened in Step 1. Attaching the Mounting Bracket to the Horizontal Bracket 4. Repeat Steps 1 - 3 to install the other Horizontal Bracket. Selecting the Appropriate Mounting Hardware Determine if the back of the TV is flush or inset.
Screw Spacer Combination Flush Mounting Surface N/A M5x14 mm N/A M6x14 mm Inset Mounting Surface M6x30 mm To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
M8x30 mm M8x50 mm To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Attaching the Vertical Brackets to a TV Warning! Do not over-tighten the screws. If you encounter resistance while you are installing the screws, stop tightening. Failure to do so could result in damage to the TV. 1. Using a Phillips Head Screwdriver, remove the Bracket Screw from the Hinge on each of the Vertical Brackets and open the Hinge. Removing Bracket Screw 2. Place the TV on a secure flat surface with the screen facing down.
4. Insert the Screws through the Washers and Vertical Brackets, and into the back of the TV. Attaching the Vertical Brackets 5. Use a Phillips Head Screwdriver to tighten the Screws. Be careful not to over-tighten the Screws. Attaching the Vertical Brackets to a TV Using Spacers If you’re attaching a TV with an inset mounting surface: 1. Place the TV on a secure flat surface with the screen facing down. Align the Mounting Holes on the Vertical Brackets with the Mounting Holes on the back of the TV. 2.
3. Insert the Screws through the Washers, Vertical Brackets, and Spacers and into the back of the TV. Using Spacers 4. Use a Phillips Head Screwdriver to tighten the Screws. Be careful not to over-tighten the Screws. Attaching the TVs to the Horizontal Bracket Warning! Attaching the TVs is a two-person job. Do not attempt to hang the TVs by yourself. 1.
2. Close both Hinges on the Vertical Brackets, and use a Phillips Head Screwdriver to fasten the Bracket Screws removed from the Hinges. TVs Mounted 3. Repeat Steps 1 - 2 to hang the second TV. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Adjusting the TVs Adjusting the tilt 1. Using a Wrench, loosen the two Nuts on the side of the Horizontal Bracket. Using a Wrench to loosen the Nuts 2. Adjust the TV to the position that you want it in, then tighten the two Nuts. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Adjusting the Swivel 1. Using a Hex Key loosen the Retainer Bolt on the back of the Horizontal Bracket. Using a Hex Key to Loosen the Retainer Bolt 2. Adjust the TV to the position that you want it in, and then tighten the Retainer Bolt. Adjusting the Vertical Position of the Ceiling TV Mount This adjustment is recommended for sloped ceiling types only and adjusts the angle of the Ceiling Mount relative to the Pole Assembly. 1.
3. Re-tighten the Nut and Bolt. Adjusting the vertical position To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Warranty Information This product is backed by a five-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall it be the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
