User Manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: September 8, 2021
Product Diagram (DS52000)
Front Angle View
Rear Angle View
Side Angle View
Bottom Angle View
5 Port 2.5G Unmanaged Multi-Gigabit Ethernet Switch
Port Function
1 Power LED • Green LED indicating Power is on
2 Link Speed LEDs
• Green LED Indicating Link Speed for the Ethernet
Port
• Top Row - 10/100/1000Mbps Link Speed
• Bottom Row - 2.5Gbps Link Speed
3 Ethernet Ports
• Connect the Ethernet Enabled Network Device to
the Ethernet Switch
4 DC Power Input
• Connect the Universal Power Adapter to the
Ethernet Switch
5 K-Slot • Connect a K-Slot Lock to the Ethernet Switch
6 Wall Mount Connectors • Connect the Wall Mounts to the Ethernet Switch
Product Information
For the latest product information, technical specications, manuals, and Declarations
of Conformance please visit: www.StarTech.com/DS52000
Package Contents
• Ethernet Switch x 1
• Universal Power Adapter x 1
• Wall Mounting Kit x 1
• Quick-Start Guide x 1
Hardware Installation
Mounting the Ethernet Switch (optional)
1. Attach the Wall Mounts to the Ethernet Switch by matching the Keying on the
Wall Mounts to the Keying of the Wall Mount Connectors and slide the Wall
Mounts towards the center of the Ethernet Switch to lock the Wall Mounts in
place.
2. Mount the Ethernet Switch by screwing it to the Mounting Location using
Appropriate Screws (not included) for the Mounting Surface Material.
Connecting the Ethernet Switch
1. Connect the Ethernet Switch to a Power Outlet using the Universal Power
Adapter
2. Connect up to 5 Ethernet Enabled Network Devices to the Ethernet Switch using
Ethernet Cables (Cat5e or better).
21
3
4
6
5