User Manual

User Manual
6
RJ45 Port
1. Connect a CAT5e/CAT6 cable to the RJ45 port on the Multiport Adapter.
2. Connect the CAT5e/CAT6 cable’s other RJ45 connector to an RJ45 port on a
compatible Network Device.
Inserting an SD Card
1. Insert an SD Card label side down into the SD Card Slot on the Multiport Adapter.
Note: The host computer’s Operating System (OS) will automatically detect the SD
Card and install the required driver software.
2. Using the host computer’s OS, navigate to the SD Card’s location (e.g. root
directory).
3. Access the data on the SD Card inserted in step 1.
Inserting a Micro SD Card
1. Insert a Micro SD Card label side up into the Micro SD Card Slot on the Multiport
Adapter and push the Micro SD Card into the Micro SD Card Slot until it clicks in
place.
Note: The host computer’s OS will automatically detect the SD Card and install the
required driver software.
2. Using the host computer’s OS, navigate to the Micro SD Card’s location (e.g. root
directory).
3. Access the data on the Micro SD Card inserted in step 1.
Removing an SD Card or Micro SD Card
Warning: Removal of the SD or Micro SD Card before it is safe could result in the loss or
corruption of data on the SD Card.
Windows
1. Click on the Up arrow on the right side of the Taskbar.
2. The System Tray will pop up revealing a set of icons.
3. Click on the Safely Remove Hardware icon.
4. The Safely Remove Hardware screen will appear.
5. Select the SD Card you wish to remove.
6. A message will appear telling you when it is safe to remove the Card from the SD
Card Reader.