User Manual

Instruction Manual

through the USB-C or Thunderbolt 3 port on your laptop.

Install the adapter

• The adapter is natively supported when connected to a compatible operating

system (see Requirements for supported operating systems). It automatically

detects and installs the required drivers once connected to a USB-C port on your

host laptop.

Connect the adapter

1. Connect your external DVI monitor to the adapter’s DVI port.

2. Connect your peripherals to the adapter (for example, a USB device such as a

keyboard, or an RJ45 network device).

3. Connect the adapter’s built-in USB-C cable to a USB-C port on your host laptop.

Power the adapter

You can power the adapter by one of the following methods.

• Bus power: The adapter is powered by your host laptop’s USB-C port and does not

require a separate power adapter.

• Your laptop’s USB-C power adapter: The adapter can be powered using your

laptop’s power adapter (if your laptop is powered by a USB-C power adapter).

o Connect the USB-C connector on your laptop’s power adapter to the USB-C

female port on the adapter. The power adapter will power the multiport

adapter and pass power through to your host laptop.

Note: To ensure sucient power is being delivered to the adapter, as well as any

connected devices, it is highly recommend that you connect and use your laptop’s

power adapter to power the multiport adapter.

Install the drivers

Once the adapter is powered and connected to your host laptop, the required drivers

install automatically. If the drivers don’t automatically install, follow the below steps to

complete the driver installation:

1. If the Found New Hardware dialog box appears on your screen, close the dialog