User Manual
Instruction Manual
4
Connect your devices to the dock
1. Connect your peripherals to the dock (for example, USB devices, RJ 45 network, and
so on).
2. Connect your external display(s) to the dock’s video port(s). The dock features one
HDMI port, and two DisplayPort ports.
Note: The USB 3.0 ports and USB 3.0 Type-C port are standard USB 3.0 throughput
ports. When the dock is connected to a host laptop, these ports provide a trickle
charge to a selection of devices.
Install the remaining drivers
Depending on your operating system, the dock will automatically install some of
the required drivers once connected to your host laptop. To complete the full driver
installation process:
1. Download the latest drivers by visiting www.StarTech.com/DK30CH2DPPD or www.
StarTech.com/DK30CH2DPPDU and clicking the Support tab.
2. Extract the contents of the compressed le(s) that you downloaded.
3. Double-click the appropriate driver for the version of Windows or macOS that you’re
running and follow the on-screen instructions to complete the installation.
Note: If you are prompted to restart your computer, do so to complete the installation.
Charge a device
To charge a device, connect it to the dock’s USB fast-charge port.
Notes:
This side facing USB 3.0 port can only fast-charge connected devices that comply with
USB Battery Charging Specication Revision 1.2.
Congure a display device
Use your Windows or Mac operating system to adjust display settings for multiple
monitors. Your laptop hardware must support dual external displays.
Notes:
• A connection to a host laptop is not required to charge your device when it’s
connected to the side facing USB fast-charge port.
• The side facing USB fast-charge port can only fast-charge connected devices that
comply with USB Battery Charging Specication Revision 1.2.