User Manual

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: August 30, 2019

Product Diagram (CMSCOILED)

Part Function

Cable-Management

Sleeve

• Organize Cables into one bundle

2 Cable Insertion Tool • Guides Cables into the Cable-Management Sleeve

Requirements

For the latest requirements please visit: www.startech.com/CMSCOILED.

Installation

Basic

1. Open the Cable Channel by rotating the Tube within the Cable Insertion Tool.

2. Feed the Cables into the Cable Insertion Tool though the V-Shaped Opening in

the Tube. (Figure 1)

Spiral Cable-Management Sleeve - Black

3. Rotate the Tube in the Cable Insertion Tool to close the Cable Channel. (Figure 2)

4. Insert the Nose of the Cable Insertion Tool into one end of the Cable-

Management Sleeve.

Figure 2

Nose

Figure 1

Cable

Channel

V-Shaped

Opening

Tube

PAGE 1
Quick-Start Guide Spiral Cable-Management Sleeve - Black Figure 1 Product Diagram (CMSCOILED) V-Shaped Opening Tube 1 Cable Channel 2 3. Rotate the Tube in the Cable Insertion Tool to close the Cable Channel. (Figure 2) Part Function 1 Cable-Management Sleeve • Organize Cables into one bundle 2 Cable Insertion Tool • Guides Cables into the Cable-Management Sleeve Figure 2 Nose Requirements For the latest requirements please visit: www.startech.com/CMSCOILED. Installation Basic 1.
PAGE 2
5. Pull the Cable Insertion Tool through the entire length of the Cable-Management Sleeve. (Figure 3) Note: It may be necessary to hold the Connectors of the Cables to prevent them from being pulled into the Cable Insertion Tool. Figure 3 6. Rotate the Tube in the Cable Insertion Tool to open the Cable Channel. 7. Remove the Cables from the Cable Insertion Tube. Advanced If the application requires specific Cables to exit the Cable-Management Sleeve at different points, follow these instructions. 1.