User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Installation
- Cutting the Table/Surface
- Installing the Module in the Modular Table Box
- Installing the Lacing Bar (Cable Organization)
- Installing the Modular Table Box into a Surface
- Assembling the Cable Management Module
- Assembly Requirements:
- Installing the Cable Management Module
14
To view manuals, videos, drivers, downloads, and more visit www.startech.com/support
3. Using a Phillips Head Screwdriver, tighten the Lacing Bar Screws. Be
careful not to overtighten.
4. Using Cable Ties (sold separately), attach the cables connected to the
Module(s) to the Lacing Bar.
Note: The Lacing Bar is used for cable management and can help reduce
cable strain, bend radius, unintentional cable disconnects and improve
organization.
Installing the Modular Table Box into a Surface
1. Place the Modular Table Box (sold separately or included in a bundle) into
the hole in the table’s surface.
2. Under the table’s surface, slide the Wing Fasteners (1 per side) into a
Mounting Slot on the Mounting Bracket. The Mounting Slot you use will
be determined by the height of the table’s surface.
Installing the Wing Fasteners