User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Installation
- Cutting the Table/Surface
- Installing the Module in the Modular Table Box
- Installing the Lacing Bar (Cable Organization)
- Installing the Modular Table Box into a Surface
- Assembling the Cable Management Module
- Assembly Requirements:
- Installing the Cable Management Module
13
To view manuals, videos, drivers, downloads, and more visit www.startech.com/support
6. Using a Phillips Head Screwdriver, tighten the Module Screws. Be careful
not to overtighten.
Installing the Lacing Bar (Cable Organization)
1. On the Modular Table Box or Single Modular Table Box, align the
Mounting Holes on the Lacing Bar with the Mounting Holes on the
Modular Table Box.
2. Insert the Lacing Bar Screws (2 per side) through the Mounting Holes on
the Lacing Bar and into the Modular Table Box.
Note: The Modular Table Box has three Lacing Bar mounting options
(left, center, and right). Mount the Lacing Bar in the position that best suits
the cable your needs.
Installing the Lacing Bar