User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Wall Mount Monitor Arm, Articulating Ergonomic VESA Wall Mount Monitor Arm, 20" (52cm) Long , Single 34" Display up to 30.9lb/14kg, Swivel/Tilt/Rotate, Adjustable Screen Mount Cable Management clips - bracket - adjustable arm - for LCD displa
Table Of Contents
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching a Monitor
1. Align the Mounting Holes (x 4) on the Monitor Mount with
the mounting holes on the back of the Monitor.
2. Insert the Hand Screws through the Monitor Mount and
into the back of the Monitor.
3. Using your ngers, tighten the Hand Screws.
Warning! Do not over-tighten the screws. If you encounter
resistance while you’re tightening the screws, stop tightening.
Failure to do so could result in damage to the monitor.
Attaching a Monitor
Attaching the Monitor Mount
Notes: Attaching the Monitor Mount may require two
people.
The Wall Mount supports up to a maximum of 30.8 lb. (14
kg).