Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Desk Mount Dual Monitor Arm, Ergonomic Dual Monitor VESA Mount for 32" 17.6lbs (8kg) Displays, Crossbar Handle for Synchronized Full Motion, Height Adjustable, C-Clamp/Grommet Small Footprint Design - mounting kit - adjustable arm - for 2 mon
41424344454647484950
44
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
22. Using the 4 mm Hex Key, tighten the two Flat Head Hex
Screws, being careful not to over-tighten.
Installing the Grab Handle
Mounting the Monitors
1. Place the Monitor screen side down on a at, clean surface.
2. (Optional) Remove any Screws or Place Holders from the
VESA Mounting Holes on the back of the Monitor.
Note: Be careful not to remove any of the Screws holding
the Monitor’s Casing together.
3. Align the Screw Holes on the VESA Mount with the VESA
Mounting Holes on the back of the Monitor. The VESA
Mount can support 75 x 75 or 100 x 100 mounting pattern.
Note When attached, the Notch on the VESA Mount should
be along the bottom edge of the Monitors.