Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Desktop Quad Monitor Stand, Ergonomic VESA 4 Monitor Arm (2x2) up to 32", Free Standing Articulating Universal Pole Mount, Height Adjustable/Tilt/Swivel/Rotate, Silver Heavy-duty VESA Mount - stand - adjustable arm - for 4 monitors
21222324252627282930
22
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjusting the Monitors
Warning! The most stable conguration of ARMQUADSS is
the “at” position, with all four of the Swivel Arms
positioned in a straight line. ARMQUADSS can become
unstable depending on how you position the Monitors. If
you adjust the position of the Monitors, you should exercise
caution and test the stability of ARMQUADSS before you use
it in the adjusted conguration.
Tilt Adjustment
Each Monitor can be tilted to accommodate dierent viewing
angles (40 degrees downward or 90 degrees upward).
1. Loosen the Hex Screw on the side of the VESA Mount by
inserting the 6 mm Hex Key and turning it counterclockwise
until the Monitor can easily be reoriented.
Note: It is not necessary to fully loosen the Hex Screws to
adjust the tilt of the Monitors.
2. Place one hand on the top edge of the Monitor and the
other hand on the bottom edge of the Monitor. Apply light
pressure to tilt the Monitors either upwards or downwards.
3. When the Monitor is in the desired position, tighten the Hex
Screw on each VESA Mount by inserting the 6 mm Hex Key
and turning it clockwise until the Hex Screw is hand tight.
(Figure 12)
Note: A second person may be required to hold the Monitors
as you tighten the Hex Screws.