User Manual

6. Complete steps 1 to 4 to add a VESA Mount to the three

remaining Monitors.

Attach the VESA Mounts to the Swivel Arms

Warning! Attaching the Monitors is a two-person job. Do

not attempt to complete this task by yourself.

Tipping hazard! ARMQUADSS is free-standing and when

you attach Monitors to it, you increase the tipping hazard.

A second person is required to keep ARMQUADSS upright as

you attach the Monitors.

1. Lift the Monitor that will be positioned on the lower left-

hand side and position it over the Swivel Arm Receptacle.

2. Insert the cylindrical portion of the VESA Mount into the

Swivel Arm Receptacle on the lower left-hand side until you

hear the VESA Mount click into place.

To remove the VESA Mounts: Locate the Clip on the

bottom of the VESA Mounts. Toggle this Clip sideways and

pull upwards.

3. Repeat steps 1-2 for the Monitor on the lower right-hand

side.

4. Lift the Monitor that will be positioned on the upper left-

hand side and position it over the Swivel Arm Receptacle.

5. Insert the cylindrical portion of the VESA Mount into the

Swivel Arm Receptacle on the upper left-hand side until

you hear the VESA Mount click into place. (Figure 11)

6. Repeat steps 1-2 for the Monitor on the upper right-hand

side.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support