User Manual

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Attach the VESA Mounts to the Monitors

ARMQUADSS is designed to be used with Monitors that are the

same size and weight. If you attach Monitors that are dierent

sizes and weights to ARMQUADSS, you do so at your own risk.

To accommodate dierent Monitor designs, ARMQUADSS

comes with six sets of Screws that are dierent lengths and

diameters.

To select the appropriate Screws for the type of Monitors that

you are using, complete the following:

• Determine whether the Monitor’s VESA Mounting Hole

Patterns are ush or inset. Inset mounts may require the

use of the Spacers.

• Determine the depth of the Mounting Holes on the

Monitors.

• Determine the diameter of the Mounting Holes on the

Monitors.

1. Position one of the VESA Mounts over the Mounting Holes

on the back of one of the Monitors.

Note: Make sure that you position the VESA Adapter so that

the Height-Adjustment Lever on the VESA Mount is facing

towards the top of the Monitor.

2. Position four of the Washers over the holes on the VESA

Mount.

3. Insert four of the appropriately sized Screws through the

Washers, the VESA Mount, and into the Monitor. (Figure 9)

4. (Optional) Place one or more Spacers between the Holes

in the Monitor and the VESA Mount, to ensure it sits at

against the Monitor. (Figure 10)