User Manual

14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Upper Pole
1. Loosen the Hex Screws that are located on the Pole
Connector using the 3 mm Hex Key with Screwdriver Tip.
2. Screw the Pole Connector onto the Lower Pole.
3. Slide the Cable-Management Clip onto the Upper Pole.
4. Screw the Upper Pole into the Pole Connector.
5. Tighten the Hex Screws that are located on the Pole
Connector using the 3 mm Hex Key with Screwdriver Tip.
(Figure 5)
Figure 5
Collar
Upper Pole
Lower Pole
Cable-
Management
Clip
Pole
Connector
3 mm Hex Key with
Screwdriver Tip