User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Desktop Quad Monitor Stand, Ergonomic VESA 4 Monitor Arm (2x2) up to 32", Free Standing Articulating Universal Pole Mount, Height Adjustable/Tilt/Swivel/Rotate, Silver Heavy-duty VESA Mount - stand - adjustable arm - for 4 monitors

10

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Figure 1

Adjust the Collar on the Lower Pole

1. Loosen the Flat-Head Screws on the Collar, using the 3 mm

Hex Key with Screwdriver Tip.

2. Slide the Collar up or down the Lower Pole so that it sits at

the desired height for your Monitors.

3. Tighten the two Flat-Head Screws that are located on the

Collar, using the 3 mm Hex Key with Screwdriver Tip.

(Figure 2)

Collar

Cable-Management Clip

Base

3 mm Hex Key with

Screwdriver Tip

Lower Pole