Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Desktop Quad Monitor Stand, Ergonomic VESA 4 Monitor Arm (2x2) up to 32", Free Standing Articulating Universal Pole Mount, Height Adjustable/Tilt/Swivel/Rotate, Silver Heavy-duty VESA Mount - stand - adjustable arm - for 4 monitors
11121314151617181920
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Assembly
Warning! Make sure that all of the hardware is assembled
properly and checked for stability before you load the
Monitors.
Warning! Make sure that the weight of the Monitors does not
exceed the weight capacity of this product. If you exceed the
weight capacity, you might experience personal injury or
damage to the product.
Assemble the Base
1. Loosen the Hex Screws that are located on the Base using
the 3 mm Hex Key with Screwdriver Tip.
2. Slide the Cable-Management Clip onto the Lower Pole.
3. Screw the Lower Pole into the Base.
4. Tighten the Hex Screws that are located on the Base using
the 3 mm Hex Key with Screwdriver Tip. (Figure 1)