User Manual

17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Remove the backing from the two Rubber Pads (7) and ax
the Rubber Pads to the tops of two of the Clamp Screws on
the underside of the L Bracket and Spring Arm. (Figure 2)
Figure 2
5. Depending on the thickness of your mounting surface, do
one of the following:
If your mounting surface is between 10 and 55 mm (0.4
and 2.2 in)
a. Position the Desk Clamp (8) so that the holes on the Desk
Clamp line up with the top two holes in the L Bracket.
b. Insert two of the Clamp Screws through the L Bracket
and into the Desk Clamp.
L Bracket
Rubber Pad
Clamp Screw
Spring Arm
Base