User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Monitor Arm, Heavy Duty Ergonomic VESA Monitor Arm, Single Display up to 9kg, Full Motion, Height Adjustable, Articulating, Aluminum, C-Clamp/Grommet, Silver Small Footprint Design - mounting kit - adjustable arm - for LCD display
Instruction manual
16
Adjust the spring arm
You need to adjust the spring arm in two places.
1. To increase or decrease the tension in the spring arm (1), hold down the spring arm
so that it is straight, and use the 6 mm hex key (14) to turn the screw in the joint of
the spring arm counterclockwise or clockwise. (gure 13)
gure 13
2. To change the angle that the monitor is tilted at, use the 6 mm hex key to turn the
screw in the side of the mount counterclockwise. When the screw is loose, position
the monitor at the angle that works best for you. Use the 6 mm hex key to turn the
screw clockwise to tighten it. (gure 14)
gure 14
6 mm hex key
6 mm hex key