User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Monitor Arm, Heavy Duty Ergonomic VESA Monitor Arm, Single Display up to 9kg, Full Motion, Height Adjustable, Articulating, Aluminum, C-Clamp/Grommet, Silver Small Footprint Design - mounting kit - adjustable arm - for LCD display
Instruction manual
9
4. Remove the backing from the two rubber pads (7) and ax the rubber pads to the
tops of two of the clamp screws on the underside of the L bracket and spring arm.
(gure 2)
gure 2
Rubber pads
Clamp screw
Spring arm
L bracket
5. Depending on the thickness of your mounting surface, do one of the following:
• If your mounting surface is between 10 and 55 mm (0.4 and 2.2 in.) thick,
position the desk clamp (8) so that the holes on the desk clamp line up with
the top two holes in the L bracket. Insert two of the clamp screws through
the L bracket and into the desk clamp. Use the 4 mm hex key to tighten the
clamp screws. (gure 3)
• If your mounting surface is between 50 and 85 mm (1.9 and 3.3 in.) thick,
position the desk clamp (8) so that the holes on the desk clamp line up with
the bottom two holes in the L bracket. Insert two of the clamp screws through
the L bracket and into the desk clamp. Use the 4 mm hex key to tighten the
clamp screws. (gure 4)