User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Monitor Arm, VESA or Apple iMac/Thunderbolt Display up to 14kg, Articulating Height Adjustable Single Desktop Monitor Pole Mount, Desk Clamp or Grommet, Silver Small Footprint Design - mounting kit - adjustable arm - for Monitor -
Table Of Contents
- Compliance Statements
- Warning Statements
- Safety Statements
- Product Diagram
- Product Dimensions
- Product Rotation
- Product Information
- Specifications
- Package Contents
- Installation
- Using the Grommet Mount
- Using the C-Clamp
- Mounting the Monitor Arm
- Attaching a Monitor Using the VESA Mount
- Attaching an iMac Monitor
- Attaching the Monitor Mount
- Removing the Monitor Mount
- Adjusting the Monitor Tilt
- Routing the Cables
21
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5. Tilt the iMac Monitor forward until the Monitor Stand
is locked into place and the eight screws on the Monitor
Stand are visible.
6. Lay the iMac Monitor face down on a at surface (e.g. desk)
with the Monitor Stand hanging over the edge of the desk.
7. Use the Torx Key to remove the eight screws from the back
of the iMac Monitor.
Removing the Screws from the iMac Monitor
8. Remove the stand from the iMac Monitor.
9. While sliding the Flange overtop of the Mounting Bracket,
align the center hole and the eight holes in the Flange
with the eight threaded holes and alignment pin on the
Mounting Bracket.